First off, thanks to those who responded to Maureen’s work yesterday & today. I greatly appreciate it. Now, a blog update. I know I’ve been posting lots of stuff for sale recently. Being off the road for the past nine months has been very nice, but it also dried up a great portion of my income. The other flip side of that is it gave me lots of time to make things. I hope to return to teaching in person in 2021, we’ll see how things unfold. I am planning an on-line class with Elia Bizzarri http://handtoolwoodworking.com/ where we’ll cover some spoon carving. He & I are planning on testing some stuff this month. We’ll both post details when we have them. It’ll be partially modeled after what Elia & Curtis Buchanan have done with their recent chairmaking stint; but I’ll have axes & knives in hand too.
In January (probably before) I’ll be concentrating on blog posts again, some carving, some chairmaking and spoon carving. I also have a 2nd set of carving drawings pretty much ready to go, but the timing was such that I’d be posting them maybe a week from now. I decided to hold them back til after the holidays. I didn’t want to add to any frenzy – no one needs it this year.
I also plan on getting back to some more video work in January. I’ve been busy trying to get the boxes done for December, but haven’t given up on the video work.
Meantime – I have three boxes and some other craft items as well as some videos & drawings available. Leave me a comment if you’d like to claim any of these, or send an email to firstname.lastname@example.org
CARVED OAK BOX – SOLD
white & red oak, white pine bottom.
H: 8 1/2″ W: 23 3/8″ D: 13″
$1,000 includes shipping in US.
This first box got posted some time ago, but it didn’t sell right off, then other blog posts pushed it aside, and I put it in a chest & forgot it. Found it the other day…the box is some great riven white oak, the lid quartersawn red oak.
This pattern is often found on 17th-century work – a surprising amount of detail in small spaces. Glued & pegged at the corners, bottom nailed on w handmade nails. Handmade iron hinges as well. A lidded till inside.
Carved box; oak & pine. Strapwork design with carved lid. SOLD
H: 8 1/4″ W: 23 1/2″ D: 11 3/4″
$1,500 includes shipping in US.
This box is a slightly new direction for some of my work. Until recently, I had mostly avoided carving the lids, but last month I made a box from yellow cedar and decided to carve its lid. I had seen a photograph of an English box with a “strapwork” pattern carved in its lid, and decided to do that. I loved the way it looked, and so did two other people at least (it sold & I took an order for a 2nd). My friend Rick DeWolf provides me with great quartersawn oak for my box-carving classes – this year he brought me the wood, but with no classes, I dove into making boxes & boxes. Among that stash was a great piece of 12″ wide perfect quartersawn stock. Bang! Carved the lid, then make a box to go under it.
You can see some streakiness through the oak on this box, the result of something or other in the tree. Time will mute all these oak colors together. Patience and patina rule the oaks. For that matter, the pine too. Here’s a photo I’ve posted before, showing a new box on the left, and one about 12 years old on the right. Both red oak and white pine. Both with linseed oil finish. The one on the right has been in use in our house now for 15 years.
CARVED BOX, S-scroll design – SOLD
H: 7 1/4″ W: 17″ D: 11″
$850 includes shipping in US.
This one’s just a bit smaller than usual. I think the box front carving was either a demo or maybe a video I did this year…however it happened, I found the board all carved – so rather than waste it I made a box to go around it.
This one has an extra carving too – the till lid I made from a leftover white oak carving. You’ll only see it when you go fumbling around in the till.
H: 5 3/4″-6″ L: 20 1/2″ W: 12″
$600 includes shipping in US.
I’ve made bowls with axes, adzes & gouges going back to the late 1980s. From time to time I take another stab at them, but usually just winging it. Then, I met Dave Fisher. I’ve watched Dave teach bowl carving a number of times, but I would usually see just some of the steps, not in order. This time, I tried to just follow Dave’s instructions based on his video with Fine Woodworking https://www.finewoodworking.com/videoworkshop/2017/11/carve-greenwood-bowl-david-fisher
It began when Joel Paul https://www.instagram.com/thepunkrockshaker/ kindly gave me 2 chunks of catalpa back in June – the first bowl I made was a gift, this one’s available.
You can flip it over and wear it as a helmet. When I shot this photo, I realized I need to carve my initials on the bottom.
CARVED SPOON #1 – SOLD
rhododendron, L: 9 1/2″ W: 2 1/2″
$100 includes shipping in US
This spoon is made from a “crook” – a naturally bent or curved section from which the spoon derives its shape. The most fun spoons there are to make…
large round basket – white ash splints; hickory rims & handle. Hickory bark lashing
14″ diameter at rims, basket height 9″ to handle 18″
$600 including shipping in US.
DVD – Build a Shaving Horse
$42 includes shipping in US
2 discs; 162 minutes.
I have 9 copies left of this video I shot with Lie-Nielsen Toolworks. They have plenty I’m sure, and they offer it as streaming video too. How to make the style of shaving horse developed by Jennie Alexander and adapted by me. Mine’s been in use since the late 1980s. I still use it all the time…
17th-century Style Carving: Devon, England and Ipswich, Massachusetts, set #1
4 pages, 24″ x 36″, rolled in a cardboard tube.
$66 includes shipping in US.
These have their own page describing them, but in summary – 4 pages 24″ x 36″ of drawings showing several designs I carve in my oak furniture. Full-scale chest panels, framing parts, box front. Step-by-step drawings showing how to establish the patterns…
You can order them directly on this page: https://pfollansbee.wordpress.com/carving-drawings-17th-century-work-from-devon-england-and-ipswich-massachusetts-set-1/