more work on the box with drawer. I’m making some of it up as I go along – when I saw the original, I was not really doing a thorough examination like I would need to actually build one. Like I need now… Here goes, just a bunch of photos, with brief captions.
installing the middle board for the box section’s bottom
the last one you gotta give it a bop
in a groove in the rear, nailed to a rabbet at the front
I turned the feet from green wood, left the tenons large. Trimmed now to fit. Here’s a test fit to see where to trim it
boring the holes for the feet, in narrow oak slats. An auger bit, nice clean hole.
Then line it up over a hole in the bench, and knock it in
Split the protruding tenon for a wedge.
The feet assemblies
The bottom of the drawer opening is a pine board, planed to 5/8″ thick. Nailed to the sides & rear.
Then nail on the feet assemblies.
Here it is with the drawer front mocked in place. Some applied moldings will cover the pine bottom. Applied decoration on the sides to come…next time is the drawer. then moldings & lid. this thing weighs a ton…
a few things left for sale – https://pfollansbee.wordpress.com/spoons-and-more-oct-2014/
Maureen tells me the felt is going quickly too – https://www.etsy.com/shop/MaureensFiberArts