Well. I opened my email tonight & found one from Geoff Chapman, one of last year’s students in the carved box class I did at Roy’s place. This sort of thing makes all that driving worth while.
We’ll start with an earlier note from Geoff, about some boxes he finished after taking the class.
“I took the carved box class from you last year at Roy’s, and loved it. I am the guy who wanted to get your help doing a strap work panel instead of finishing my box. By the time Christmas came I’d made a bunch of them for my kids, and threw in some designs from a celtic cross, from an ancient icon of an angel, and a couple panels from designs from the Book of Kells (photo enclosed). I have studied the Book of Kells a good bit, and also wanted to try a panel from the famous “8 Circle Cross” illustration (another photo enclosed) which I framed with draw bored joinery – you taught me how in the carved chest dvd.. I lurk around your blog often, and love the work you do. I am about to try my hand at a carved chest, and have watched your dvd twice. A friend took down an oak this winter that was 42″ wide in the lower trunk, 150 years old, straight trunk for the first 30 feet. He gave me the trunk, so I split it accd to your instructions, got it down into 16ths, hauled it home in 2.5′ and 4′ ft lengths, did some preliminary milling to get the pieces ready for the chest and the rest of it – a lot! – is stacked, drying, and awaiting another run of boxes or maybe another chest.
All of that is to say, Peter, that you have opened a wonderful door for me in carving and especially in 17th century green woodworking, and I am grateful. I don’t do this for a living (I would starve!); I am a pastor of a very busy church here in Pittsburgh, and a full time dad and grampa. Woodworking has been a 20 year hobby for me, a great balance to my life, and one that has taken a new and wonderful direction since I started carving and working with green oak early last year.
Thanks again. What you do matters to people like me!”
Then tonight’s really knocked me out – here’s his note & photos.
Well, I went after a three-panel carved chest using your DVD. I took a couple vacation weeks in July to get it moving, then managed to get it completed this week. It’s 20″ deep, 30″ high, 40″ wide (or close to that), all Q’sawn or rived oak from the tree trunk I got in January, except a pine floor and till parts. No glue (never done anything close to that before!), but drawbored. I copied the wainscot chest you have copied, and added a paneled top. I love the design, and the way it came out. Will finish it w linseed oil and turpentine in a couple of weeks.
I was full of questions along the way, like ‘How dry does the wood need to be?” and “Why don’t you have to worry about wood movement in a pine floor if you drive the final board in?” and at least 30 others – but I muddled my way through. Today I received a copy of your “Joint Stool” book and flipped through it. I would have been wise to have read it before taking on the chest! But most things seemed to work out well enough and I learned a ton from the DVD, the joiner’s notes that came with it, and from going back repeatedly to your posts on your blog – and then when I still had worries – just thinking it through and doing what seemed to make sense.
One of my other constant questions was “How exact do I need to be?” Your repeated encouragement to pay attention to the things that matter and relax about a lot of the other stuff gave me permission to do the same. I remember when I first heard you say, “The eye is very forgiving.” So is this style of woodworking! Drawboring is forgiving, for example. I know where all the mistakes are on the chest, but no one else has noticed them yet and no one has pulled it out to look at the back or turned it over to look at the bottom. Yet the result of the whole effort has a real beauty and strength that will last. So, thanks for your attitude. I will almost certainly do another one, and my kids are all eager to have me do one for them…
I also had a thought on the small chest you did and took to Roy’s to film for a show (I look forward to seeing that!). I was astounded at the amount of work that went into making my own first chest, and I thought over and again, “There’s no way I could do this in a week long class, even without the carving or the paneled top…” Depending, perhaps on the readiness of the stock – and the pins (shaving 71 of them for my chest took a long time!! – don’t ask why it is an odd number ;-) ). But a small chest in a week! Would be quite a challenge for me, especially if we were planing every piece to finished size. I will look forward to seeing the episode w. Roy and whether you offer a class.
Anyway, the project was a genuine joy, and a further step along a wonderful path in woodworking. I want to thank you again for what you are doing and what you put within reach of people like me. “
Geoff – nice going. I can’t thank you enough for your kind words, and for your outstanding work. Thanks for sending it along & letting me post it here.